You can 'phone me on 01329 832178 or email me.

I live in Hampshire, UK.
Visit my web site

Offers Manuals etc. I have a few MRN and N keys. If you need one, send me the number by email and I'll let you know if I have one. Early Lamps and Charging (Low / High) ignition switch, brand new. Details in the Wanted column - swap preferred. Jaeger Speedometer - 34/37 diameter - SS370 1600 - magnetic - Flat glass - 0 miles - apparently brand new but domed glass got broken. Ditto S380-5-37 - No glass - black rim - 9,062 miles Smiths Speedometer - 34/37 diameter - S433/I/L - chronometric - Domed glass - 47,531 miles - Rover red lines at 30 & 50 mph are absent. This speedo accepts the standard P2 Rover threaded connection. 1936 1 hub cap (side screw )- which needs plating. A couple of wintone (short as P3) trumpet horns - fair condition 34 / 47 radiator cap - needs plating Speedometers 3 sets of corroded new 16 pistons - STD, +30 & +60 Control Boxes - RF95/2 - 1 LOOKS new, but is a factory recon, one used; RF95/3 - one used: RF90 - used; RB06/2 - used; RB106/1 - used; RB 340 - used. '47 P2 large hub cap - needs replating. 1 39 2- screw hub cap - ,scratched - needs repair and replating. Engine 952348 - would appear to be '39 14 replacement engine with cylinder head, petrol pump, distributor and manifolds. Stood for 3 decades. Also rusty clutch, dynamo and starter. Rover 2000 engine, wings, doors, exhaust and other bits - ask. I have more but have yet to make a list.

Wanted I retired in 1990, and have at last started my retirement project - to rebuild my 1934 Rover 12 Tourer. I need all the help I can get. 34/36 10/12 Dumb Iron Covers 34 both headlamp bars with cast chairs in good condition A perfect Front bumper - advise overall length 34/36 sidelamp innards 34/36 battery carrier - advise dimensions - I have one as a pattern but I'm not sure it's correct for a tourer. 34 10/12 Owner's Handbook (Car No 411755) - I will offer a 35 one in exchange (Cars Numbered 501001, 511001 and 541001 onwards) 34 10/12 Tourer Sidescreens - I have only a left front and a right rear screen, both very tatty. A perfect 34 10/12 instrument panel, see 1 The Lamps / Charging Rate switch is required, see 2, preferably as a swap for an earlier one I have - Lucas PLC.TYPE which incorporates a central ignition key, is brand new and has different legends. I don't know what Rover model it fits. Otherwise, I'm going to have to do the lettering, and that's not my forte or even threete. Startix Control Switch for above see 3 I have one, thanks to Mike Evans, but the front needs plating and there's the lettering to be done. 34 horn back cover in good condition - fits round a 5 inch diameter, see detail 34 Gear stick assembly in perfect condition from any P2 model. A later one might fit but I'd need to make measurements to be sure. Sidescreen bolt. I need 6 of these and they are 2.25 inches from the tip of the wing to the opposite side of the bolt head. If you have some or know where they can be obtained I'd like to hear from you. Mike Evans may get some made. If anyone has managed to make a bigger spare wheel cover to fit the larger "modern" tyre size, I'd like to know how. You know those wood and machine screws and washers, chrome plated in various sizes: examples are the ones that secure the dumb iron covers, the dashboard, the trim . . . I have quite a few missing. When I bought the car I tramped round the field in the long grass finding things with my feet, and there are gaps. Lots! If you have any you'll never use or know of suppliers, I'd like to hear from you. 39 14/16 horn chrome cover and front Didn't I say - I have a 39 16 too More to come - ask me.